apox
★ FEATURED
DIAMOND SKF24
APOX DIAMOND SKF24
High penetration and extra adhesion strength on white and grey stones.
APOX
CODE: ULTRA 9019
Click to enlarge
Parti Garantisi
R&D laboratory approved standard viscosity and curing.
Industrial Line
Fully compatible with automatic and manual natural stone processing lines.
Field Support
Technical application consultancy specific to stone type and kiln regime.
APOX ULTRA 9019
PRODUCT CODE: ULTRA 9019
Low viscosity; extra penetration in natural curing.
Product Group / Series
Ultra Series
Binding Strength
High Mechanical Adhesion
Application Direction
Yatay / Dikey Blok & Plaka
Surface Compatibility
Marble, Granite, Natural Stone
Compatible Surfaces & Application Areas
Product Engineering Profile
APOX ULTRA 9019 — Technical Evaluation
Low viscosity; extra penetration in natural curing.
Low-viscosity epoxy systems suitable for natural curing, multi-deck oven, and microwave processes.
APOX epoxy adhesive systems are engineered to deliver high penetration and minimal shrinkage across natural stone block consolidation, crack repair, and slab meshing lines, reducing production waste through reaction profiles tailored to ambient temperatures and stone porosity.
Technical Specifications & System Parameters
ULTRA 9019- Mixing ratio
- 4/1
- Gel time
- 20–30 min.
- Curing time
- 1.5 hours on marble at 40°C in multi-deck oven; 24 hours in natural curing
- Color
- Transparent
- Viscosity test condition
- Resin CPS, 25°C, 20 RPM (ASTM D2196)
- Subcategory / Series
- Ultra Series
- Recommended Application Areas
- Marble, Natural stone, Slab reinforcement, Bonding and filling
- Chemical Structure
- Modified epoxy resin and special hardener system
- Application Temperature
- Industrial line environment between +10 °C and +35 °C
- Storage and Shelf Life
- 12 months in a dry and cool environment in its original closed packaging
- Quality Control Standard
- APOX R&D batch-based viscosity and cure verification
Field Application Protocol
4-Step Recommended Application & Process Guide
STEP 01
Surface Preparation
Completely clean the natural stone surface to be applied from dust, oil, moisture and loose particles.
STEP 02
Homogeneous Mixture
Mix components A and B in the weight/volume ratio specified in the product technical sheet until a homogeneous color is obtained.
STEP 03
Application to Surface
Spread the prepared mixture on the crack, pore or joint surface with a spatula or appropriate equipment, leaving no gaps.
STEP 04
Curing & Processing
After the curing period depending on the ambient temperature and oven line regime is completed, proceed to the cutting and polishing process.
Epoxy Adhesives
Related Products in the Same Category
apox
★ FEATURED
apox
★ FEATURED
BLUETECH IQ1000
APOX BLUETECH IQ1000
Ultra-low viscosity and extended yellowing resistance; high penetration on colored hard stones.
apox
ULTRA 3045
APOX ULTRA 3045
Low viscosity and extended yellowing resistance; ideal for beige stone groups.
apox
APOX
APOX ULTRA 9019
CODE: ULTRA 9019
1 / 2
Technical Solution Desk
Let’s determine the right product for your project together.
Consult our technical team regarding surface type, application process, and product line.